Manual Provisioning - Polycom

** ! We generally recommend that all handsets be factory reset prior to provisioning, as previous settings may interfere with handset operation. !**

Reset the Handset to Factory Defaults

  1. In a web browser on a computer on the same network as the phone, browse to the phone's IP address.
  2. Log in as admin and enter the password 456 or 7627
  3. Navigate to Utilities > Phone Backup & Restore
  4. Underneath the "Global Settings" option, click "Restore phone to factory settings"->Restore
  5. The phone should reboot back into factory settings


Configure Provisioning Via the Website

  1. In a web browser on a computer on the same network as the phone, browse to the phone's IP address.
  2. Log in as admin and enter the password 456 or 7627
  3. Navigate to Settings > Provisioning Server.
  4. From the Server Type drop-down, select HTTPS.
  5. In the Server Address field, enter the Option9 Polycom Provisioning Server address: https://ndp1-cos.option9.net/cfg/
  6. Hit Save, and the handset should reboot and auto-provision.

Configure Provisioning Via the Handset Menu Directly

  • Press the Menu button, navigate to Settings then Advanced
  • Type in the password, default is "456" or "7627"
  • Navigate to Admin Settings>Network Configuration>Server menu
  • Change "Server Type" to HTTP
  • Enter the "Server Address" as http://ndp1-cos.option9.net/cfg/
  • Exit and Save, the phone should reboot
  • 0 Kasutajad peavad seda kasulikuks
Kas see vastus oli kasulik?

Seotud artiklid

Automatic Provisioning with DHCP Options

Concept SIP devices can be provisioned remotely using the Option9 Provisioning Server. Once...

Manual Provisioning - Linksys ATA or router

Manual Provisioning Server for Linksys ATA or router(SPA112, SPA122, PAP2T, SPA2102,etc) Obtain...

Adtran SIP Trunk

This article will detail setting up an Adtran 904e (2nd Gen) or Adtran 908e (2nd Gen) for SIP...

Configuring Windows DHCP Server Options

Use this procedure to configure DHCP option records for various phone types -- Polycom uses...

Cisco CUBE SIP Trunk

Cisco CUBE configuration requires a knowledge of setting up dial-peers that is outside the scope...