Manual Provisioning - Linksys ATA or router

Manual Provisioning Server for Linksys ATA or router(SPA112, SPA122, PAP2T, SPA2102,etc)


Obtain your ATA's IP Address

  1. Plug in an analog phone to the phone port.
  2. Press "****" to access menu
  3. dial "110#" to hear the current IP address played for you.

Once you have your ATA's IP Address

  1. Access the Web UI of the phone using the IP address found in the previous step
  2. Navigate to Admin --> Advanced page, then click on the Provisioning tab.
  3. Change the Profile Rule to Match the following picture, using the syntax http://ndp1-cos.option9.net/cfg/spa$MA.cfg







  4. Some newer phones have this located under Voice->Provisioning:




  • 0 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Artículos Relacionados

Manual Provisioning - Polycom

** ! We generally recommend that all handsets be factory reset prior to provisioning, as previous...

Automatic Provisioning with DHCP Options

Concept SIP devices can be provisioned remotely using the Option9 Provisioning Server. Once...

Adtran SIP Trunk

This article will detail setting up an Adtran 904e (2nd Gen) or Adtran 908e (2nd Gen) for SIP...

Configuring Windows DHCP Server Options

Use this procedure to configure DHCP option records for various phone types -- Polycom uses...

Cisco CUBE SIP Trunk

Cisco CUBE configuration requires a knowledge of setting up dial-peers that is outside the scope...