Mitel 5000

Create SIP Trunk Groups
1. Navigate to System > Devices and feature codes > SIP Peers > SIP Trunk Groups.
2. Right click on the screen and select Create SIP Trunk Group.
3. Set Starting Extension: 92004 is selected for this example.
4. Set Number of extensions: 1 is given for this example.
5. Click OK.

Create SIP Trunk Group

SIP Trunk Configuration
1. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Configuration.
2. Fully Qualified Domain Name: provided by Data102, sip1.magnavoip.com is used in this example.
3. Operating State: Select In-Service from the drop down menu.
  --- Optionally set "Use ITU-T E.164 Phone Number" to "Yes" for e164 support.
4. All the other options are set to default values.

Configure SIP Trunk




Configure the Registrar
5. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Configuration > Registrar.
6. Make sure Enable Registration is set to "Yes".
7. Set Registrar FQDN: provided by Data102, sip1.magnavoip.com is used in this example.
8. All the other values are set to default values.

Configure Registrar





Configure Authentication

9. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Configuration> Authentication.
10. Set Out-bound Username: provided by Data102, 0023*001 is used in the example.
11. Set Out-bound Password: provided by Data102. 
length is 13 characters in length. This must be 12 or less at this time.
12. All the other values are set to default values.

Configure Authentication



Configure Additional Proxy

13. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Configuration> Alternate IP/FQDN List.
14. At the right side panel, right click the mouse, select Add To Alternate IP/FQDN List… , a new window appears; add Data102's additional IP address to IP Address field, 64.111.17.67 is used in the example.



Add additional Proxy




15. Click OK to confirm.

Confirm additional proxy



Configure Route Set

16. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Configuration> Route Sets.
17. Right click at right side panel, Select Add to Route Set List…, add SIP proxy name provided by Data102 to the Hostname field, sip1.magnavoip.com is used in the example.

Add Route Set





Call Routing Tables Configuration

1. Navigate to System > Trunk-Related Information> Call Routing Tables.
2. Double click Call-Routing Tbl 01 --> In our example, we are using #10, "D102Test"




3. Under Pattern: Assign the 10 digit DID number
4. Under Ring-In Destination: Assign the appropriate PBX extension number.
5. All other fields are leave to default






Trunk Group Configuration
1. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Trunk Group Configuration.
2. Set Day/Night Ring-In Type to Call Routing Table as Value and Extended Value set to 1 which is configured in Section "Call Routing Tables Configuration" (we used #10, and set it to #1 here)
3. Leave Propagate Original Caller ID to "No" to avoid external forwards/transfers from having an unknown TN for the callerid
4. Set Calling Party Name: YourCallingName is given in the example
5. Set Calling Party Number: This is the demo or startup number assigned by Data102.




6. Navigate to System > Devices and feature codes > SIP Peers >SIP Trunk Groups > 92004 > Trunk Group Configuration>Trunks.
7. Right click on the screen and click Create SIP Peer Trunk.
8. Set Starting Extension: The default Starting Extension 94100 is used for this example.
9. Set Number of Extensions: 9 is selected for this example





  • 48 Users Found This Useful
Was this answer helpful?

Related Articles

FreePBX / Asterisk

Configuring your FreePBX to work with MagnaVoIP requires three things: a trunk, an outbound route...

Softphone - Windows - MicroSIP

Download MicroSIP from the download URL:...

Softphone - Mac OSX - Telephone

This article is written for Telephone, which is a free application available through the OSX App...

Softphone - Mobile - Grandstream Wave

This guide will show you how to configure the Grandstream Wave softphone for you mobile...

Softphone - Windows - X-lite

Step 1: Gather information for each user. Each user has a set of credentials which will be needed...